The Speedybee F7 35A Mini Flytower flight control electro-modulation time-travel machine DJI HD digital map transmission
The Speedybee F7 35A Mini Flytower flight control electro-modulation time-travel machine DJI HD digital map transmission
|
Product Name |
SpeedyBee F7 Mini Specs |
|
MCU |
STM32F722 |
|
IMU(Gyro) |
BMI270 for current batches; MPU6000 for old batches before May 2022. |
|
USB Port Type |
Type-C |
|
Barometer |
N/A |
|
OSD Chip |
AT7456E chip |
|
BLE Bluetooth |
Supported. Used for Flight Controller configuration (MSP should be enabled with Baud rate 115200 on UART 6) |
|
WIFI |
Not supported |
|
Flash FC Firmware Wirelessly |
Not supported. Please update firmware for this FC on the PC |
|
Download/Analyze Blackbox |
Not supported. Please download and analyze Blackbox data on the PC |
|
DJI Air Unit Soldering Pads |
Supported |
|
Flash(for BlackBox) |
8MB |
|
Current Sensor |
Supported, Scale=250 Offset=-500 |
|
BetaFlight Camera Control Pad |
Yes(CC pad) |
|
Power Input |
3S - 6S Lipo |
|
5V Output |
6 groups of 5V output, five +5V pads and 1 BZ+ pad( used for Buzzer). The total current load is 2.5A. |
|
9V Output |
2 groups of 9V output, the total current load is 2A. |
|
3.3V Output |
Supported. Up to 500mA current load. |
|
ESC Signal Pads |
M1 - M4 |
|
UART |
Full UART * 3(UART1, UART2, UART3) |
|
ESC Telemetry UART |
R4(UART4) |
|
I2C |
Not supported |
|
LED Pad |
Used for WS2812 LED |
|
Buzzer |
BZ+ and BZ- pad used for 5V Buzzer |
|
BOOT Button |
Used to enter DFU mode |
|
RSSI Input |
Not supported |
|
SmartPort |
Use any TX pad of UART for the SmartPort feature. |
|
Supported Flight Controller Firmware |
BetaFlight(Default) |
|
Firmware Target Name |
SPEEDYBEEF7MINIV2 for current batches(Gyro: BMI270); SPEEDYBEEF7MINI for old batches(Gyro: MPU6000) before May 2022. |
|
Mounting |
20 x 20mm, 3.5mm hole diameter |
|
Dimension |
30 x 30 x 7.5mm |
|
Weight |
5.7g |
|
Product Name |
SpeedyBee 35A BLHeli_S Mini 4-in-1 ESC Specs |
|
Firmware |
BLHeli_S JH40 |
|
Continuous Current |
35A * 4 |
|
Burst Current |
45A(5seconds) |
|
ESC Protocol |
DSHOT300/600 |
|
Power Input |
3-6S LiPo |
|
Power Output |
VBAT |
|
ESC Telemetry |
Not supported |
|
Current Sensor |
Support (Scale=250 Offset=-500) |
|
Mounting |
20 x 20mm, 3.6mm hole diameter |
|
Dimension |
35 * 35 * 5.5mm |
|
Weight |
7g |
|
|
Die Versandkosten richten sich nach dem Gewicht. Fügen Sie einfach Produkte zu Ihrem Warenkorb hinzu und verwenden Sie den Versandkostenrechner, um den Versandpreis anzuzeigen.
Wir möchten, dass Sie mit Ihrem Kauf 100 % zufrieden sind. Artikel können innerhalb von 30 Tagen nach Lieferung zurückgegeben oder umgetauscht werden.
