The Speedybee F7 35A Mini Flytower flight control electro-modulation time-travel machine DJI HD digital map transmission
The Speedybee F7 35A Mini Flytower flight control electro-modulation time-travel machine DJI HD digital map transmission
|
Product Name |
SpeedyBee F7 Mini Specs |
|
MCU |
STM32F722 |
|
IMU(Gyro) |
BMI270 for current batches; MPU6000 for old batches before May 2022. |
|
USB Port Type |
Type-C |
|
Barometer |
N/A |
|
OSD Chip |
AT7456E chip |
|
BLE Bluetooth |
Supported. Used for Flight Controller configuration (MSP should be enabled with Baud rate 115200 on UART 6) |
|
WIFI |
Not supported |
|
Flash FC Firmware Wirelessly |
Not supported. Please update firmware for this FC on the PC |
|
Download/Analyze Blackbox |
Not supported. Please download and analyze Blackbox data on the PC |
|
DJI Air Unit Soldering Pads |
Supported |
|
Flash(for BlackBox) |
8MB |
|
Current Sensor |
Supported, Scale=250 Offset=-500 |
|
BetaFlight Camera Control Pad |
Yes(CC pad) |
|
Power Input |
3S - 6S Lipo |
|
5V Output |
6 groups of 5V output, five +5V pads and 1 BZ+ pad( used for Buzzer). The total current load is 2.5A. |
|
9V Output |
2 groups of 9V output, the total current load is 2A. |
|
3.3V Output |
Supported. Up to 500mA current load. |
|
ESC Signal Pads |
M1 - M4 |
|
UART |
Full UART * 3(UART1, UART2, UART3) |
|
ESC Telemetry UART |
R4(UART4) |
|
I2C |
Not supported |
|
LED Pad |
Used for WS2812 LED |
|
Buzzer |
BZ+ and BZ- pad used for 5V Buzzer |
|
BOOT Button |
Used to enter DFU mode |
|
RSSI Input |
Not supported |
|
SmartPort |
Use any TX pad of UART for the SmartPort feature. |
|
Supported Flight Controller Firmware |
BetaFlight(Default) |
|
Firmware Target Name |
SPEEDYBEEF7MINIV2 for current batches(Gyro: BMI270); SPEEDYBEEF7MINI for old batches(Gyro: MPU6000) before May 2022. |
|
Mounting |
20 x 20mm, 3.5mm hole diameter |
|
Dimension |
30 x 30 x 7.5mm |
|
Weight |
5.7g |
|
Product Name |
SpeedyBee 35A BLHeli_S Mini 4-in-1 ESC Specs |
|
Firmware |
BLHeli_S JH40 |
|
Continuous Current |
35A * 4 |
|
Burst Current |
45A(5seconds) |
|
ESC Protocol |
DSHOT300/600 |
|
Power Input |
3-6S LiPo |
|
Power Output |
VBAT |
|
ESC Telemetry |
Not supported |
|
Current Sensor |
Support (Scale=250 Offset=-500) |
|
Mounting |
20 x 20mm, 3.6mm hole diameter |
|
Dimension |
35 * 35 * 5.5mm |
|
Weight |
7g |
|
|
Shipping cost is based on weight. Just add products to your cart and use the Shipping Calculator to see the shipping price.
We want you to be 100% satisfied with your purchase. Items can be returned or exchanged within 30 days of delivery.
