FlyingRC produces F4Wing Mini MK1 super mini fixed wing flight control UAV model flight control

Product description:

- STM32F405RGT6 main control, M4 core, 168MHz main frequency, 1MB Flash. Compared to other closed source mini flight controllers (using STM32F0 series), the performance is more than 5 times stronger.

- ICM42605 gyroscope, third-generation TDK sensor, optimized for drone applications.

- SPL06 barometer, high-precision barometer.

- Onboard dual LDO, sensor independent power supply, more stable flight.

- 7PWM output, 3.5 serial ports (SBUS only counts half a serial port).

- Suitable for small and micro fixed wing aircraft (such as F80, micro claws, modified hand throwing airplane, Arwing Mini, etc.)

Specification:

- Item name: flight controller

- PCB board size: 27.9x20.3x11.2mm/1.1x0.8x0.44in

- Weight: about 2.8g (not including pin header, about 5.3g after welding the pins)

Features:

- The TypeC interface is directly inserted into the flight controller, with stable connection and longer lifespan. It can be connected to a mobile phone through dual C-cables and tuned through the mobile phone version of the ground station (it is recommended to use the QGroundControl App for AP firmware).

- No analog ammeter function (can be connected to an external I2C protocol ammeter), supports battery voltage output (SH1.0 2P interface), and the battery voltage also supplies power to the high-definition image transmission direct insertion port, supporting up to 6s input.

- Supports high-definition direct insertion (SH1.0 6P interface), high-definition OSD (DJI HD, Snail HD, OpenIPC, etc.), but does not support analog OSD.

- It can directly insert the ELRS receiver (as shown in Figure 5), greatly reducing its size.

- Support open source firmware such as AP, BF, INAV, etc. Fixed wing recommends using AP firmware.

- Mass production PCB process: black solder mask, immersion gold, resin plug hole, 4-layer board.

- Mass production SMT process

4 types for your refer:

- welded pins w BEC: with welding pins, with BEC module

- welded pins no BEC: with welding pins, no BEC module

- not welded w BEC: not welded with pins, with BEC module

- not welded no BEC: not welded with pins, no BEC module

Note:

- Size is manual measurement, there are exist errors.

- The RC airplane, receiver, propeller, connection cable and others in picture shown will not include.

- The picture is only a schematic diagram, and the actual receipt shall prevail.

Package include is optional

1pcs flight controller (welded/not welded with pins)

or

1pcs flight controller (welded/not welded with pins) + 1pcs BEC