Item Name: F4 Brush Flight Control
Dimension: 22mm*32.5mm
Thickness: 1.2mm
Weight: 4g
Features:
1. F4_Brush Flight Controller hardware platform based on Openpilot CC3D Revolution series, support Raceflight, Betaflight, default delivery is Betaflight.
2. F4_Brush flight control is equipped with F4 chip, the controller based on STM32F405 controller and advanced ARM Cortex M4 architecture.
3. The highest frequency rate reached 168MHZ, far beyond the 72MHZ F3 series controller, the performance was further improved.
4. F4_Brush Flight Controller support 1S or 2S power input. and equipped with 1S/2S power switch.
5. Flight control circuit design perfect, cabin pressurization and depressurization technology, both 1s and 2S power input, UART1/2/3 output 5V, DSM output 3.3V.
6. With a large current NMOS transistors, operating current of up to 10A or more. Each machine is equipped with freewheeling diodes.
7.Support SBUS/DSM/DSM2/DSMX Receiver.
Receiver configuration:
1. DSM/DSM2/DSMX receiver soldered directly to the DSM/DSM2/DSMX Receiver interface 3.3V, GND, RX3. Enable Seria_RX for UART3 and Set Receiver mode RX_SERIAL, Select Spektrum1024(DSM/DSM2) or Spektrum2048(DSMX) in Raceflight configurator.
2. SBUS receiver welded to the UART1 GND, + 5V, RX1. Then Enable Seria_RX and Set Receiver mode RX_SERIAL , Select Sbus signal in Raceflight configurator.